• Powerful Microprocessor
    • Wireless communication
    • Range up to 300m
    • Data logging
    • Quick setup
    • Additional options available

    WiOne measures relative humidity, temperature and other parameters, additionally it can store measurements on internal memory. Wireless communication is one of the basic advantages of the device. Receivers that communicate with the data logger wirelessly in the 868 MHz frequency band, enable the connection with the industrial network RS-485 (Modbus RTU) or Ethernet (Modbus TCP) and communication with the automation system, HVAC system, BMS system or dedicated ADAPS or IDAPS software.

    (1) – RS-485 interface (Modbus RTU) or Industrial Ethernet (Modbus TCP)

    WiOne data logger has special algorithms that automatically start data logging only when there is no communication with the receiver. Each device has ability to set a unique address in the network, assign to a selected subnet (you can create system subnets and assign devices to them), set the channel used for transmission and operating modes (standard and with extended wireless communication range). In addition, the WiOne data logger has a UART service interface connector, dedicated to configure the device and read the data stored in the memory. The service software is provided free of charge.

    Technical drawing

    All dimension in mm. This drawing is for informational purposes only. The manufacturer reserves the right to make changes in the product dimensions without prior notice.

Kod produktu


Typ urządzenia

Data logger

Mierzone parametry

Humidity, Temperature

Zakres pomiarowy

 -100…+200 °C (with Sens-H-… probe),  -50…+100 °C (with Sens-H-… probe),  0…100 %RH (with Sens-H-… probe)

Dokładność (maks.)

 ±0.1 °C (with Sens-H-… probe),  ±0.8 %RH (with Sens-H-… probe)

Dodatkowe opcje

Typ sensora

Interchangeable probe

Filtr sensora

Probe dependent filter


8…27 VDC


Radio 868MHz, UART (service mode)

Wyjścia analogowe

Wyjścia analogowe - typ

Wyjścia analogowe - rozdzielczość

Wyjścia binarne

Wyjścia binarne - parametry

Przyłącze elektryczne

Service connector, Spring connector – 14…20 AWG (2,08…0,516 mm²)

Diody serwisowe

1x LED


Pamięć - rejestrowane dane

Date, Measured values

Pamięć - typ


Pamięć - pojemność

64.000 (date / time + measured data)

Pamięć - częstotliwość zapisu



Configuration software, UART

Stopień ochrony


Temperatura pracy

-30…+60 °C

Wilgotność pracy


Typ obudowy


Materiał obudowy


Wymiary obudowy

See: drawing

W komplecie

Stay up to date

Call or write

Contact by phone or email