Si-QHPP2A0

    • Powerful Microprocessor
    • Functionally Programmable
    • Fast Configurations
    • Modbus Interface
    • Wide range of supply voltage
    • Additional options available

    SiOne can be humidity, temperature, barometric pressure, differentia pressure, carbon dioxide (CO2), volatile organic compounds (VOC), particulate matter (PM) and/or Analog signal transmitters (it depends on model). The SiOne line combined with an internal and/or external sensors provide state-of-the-art functionality. Various models are available including wall, duct or remote sensors. SiOne is introducing powerful programming capabilities. Settings of the device can be modified through USB programming unit, PC software or Modbus interface. Modbus RTU baud rate, Modbus RTU address and type of Analog outputs can be fast changed by configuration jumpers.

    Schemat połączenia SiOne

     

    ( 1 ) – RS-485 interface (Modbus RTU) or Industrial Ethernet (Modbus TCP)
    ( 2 ) – programmable relay output On/Off (option)
    ( 3 ) – programmable (up to 3) Analog outputs: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA (option)

     

    SiOne transmitters offers Fieldbus (RS-485 – Modbus RTU) or Industrial Ethernet (Modbus TCP) interfaces. The SiOne line can provide up to three fully programmable and scalable Analog outputs (types of output: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA). Analog output can be modified by configurations jumpers, Modbus interface or USB programming unit. SiOne transmitter with relay output can be used as simple binary sensor (pressostat, hygrostat, thermostat, CO2-stat, …). Threshold and hysteresis of output can be also modified by Modbus or programming unit.

    Technical drawing

    All dimension in mm. This drawing is for informational purposes only. The manufacturer reserves the right to make changes in the product dimensions without prior notice.

Kod produktu

Si-QHPP2A0

Typ urządzenia

Transmitter

Mierzone parametry

Humidity, Particulate matter (PM1, PM2.5, PM4, PM10), Temperature

Zakres pomiarowy

 -100…+200 °C (with Sens-H-… probe),  -50…+100 °C (with Sens-H-… probe),  0…100 %RH (with Sens-H-… probe), 1…1000 μg/m³

Dokładność (maks.)

±10 μg/m³,  ±0.1 °C (with Sens-H-… probe),  ±0.8 %RH (with Sens-H-… probe)

Częstotliwość pomiaru

0.25 Hz (PM), 1 Hz, 1 Hz (humidity)

Dodatkowe opcje

Psychometric calculations

Typ sensora

Integrated, Interchangeable probe

Filtr sensora

Probe dependent filter

Zasilanie

11.5…32 VDC / 24 VAC ± 5% (…-HV version), 11.5…27 VDC

Interfejs

RS-485 (Modbus RTU)

Wyjścia analogowe

Wyjścia analogowe - typ

Wyjścia analogowe - rozdzielczość

Wyjścia binarne

Wyjścia binarne - parametry

Przyłącze elektryczne

Spring connector – 14…20 AWG (2,08…0,516 mm²)

Diody serwisowe

2x LED

Wyświetlacz

Pamięć - rejestrowane dane

Pamięć - typ

Pamięć - pojemność

Pamięć - częstotliwość zapisu

Parametryzacja

Configuration software, DIP-switches, Modbus

Stopień ochrony

IP20

Temperatura pracy

-10…+60 °C

Wilgotność pracy

0…95 %RH (WITHOUT CONDENSATION)

Typ obudowy

Wall

Materiał obudowy

ABS

Wymiary obudowy

See: drawing

W komplecie

Manual

Stay up to date
Consultation

Call or write

Contact by phone or email