• Modbus Interface
    • Wireless communication
    • Quick setup
    • DIN rail compatible
    • Additional options available
Do pobrania:

    Depending on the version transmitter from the ZiOne series is used to measure, analog signals in the range of 0 … 10 V, 0 (4) … 20 mA or signals from resistance temperature sensors PT100 / PT1000. The device has four independent measurement channels, thanks to which it allows to connect four sensors with an analog output (voltage or current) or four PT100 sensors simultaneously. By using the programmer (CODAP-RS485) and the configuration program (APConfig PC [ZiOne]), the user can change the device settings (including among other: change settings regarding data transmission, etc.).

    ( 1 ) – RS-485 interface (Modbus RTU)
    ( 2 ) –Wireless interface (Radio 868 MHz)

    Each Zi-One transmitters has an RS-485 (Modbus RTU) comunication interface used for comunication with a master device (e.g. PLC, HMI or PC). Selected models of the transmitters are additionally equipped with a radio module enabling wireless communication in the 868 MHz band (to work with the transmitter it is required to use an appropriate radio receiver, which is available in the company’s offer). ZiOne devices can be used in HVAC systems, BMS systems and air parameters monitoring systems (thanks to the use of, among others, ADAPS or IDAPS proprietary software).

    Technical drawing

    All dimension in mm. This drawing is for informational purposes only. The manufacturer reserves the right to make changes in the product dimensions without prior notice.

Kod produktu


Typ urządzenia


Mierzone parametry

Analog signal (V/mA)

Zakres pomiarowy

0…20 mA, 4…20 mA

Dokładność (maks.)

 ±0.1% (% FS)

Częstotliwość pomiaru

100 Hz

Dodatkowe opcje

Average filter, Continuous filter

Typ sensora

Filtr sensora


11.5…27 VDC


RS-485 (Modbus RTU)

Wyjścia analogowe

Wyjścia analogowe - typ

Wyjścia analogowe - rozdzielczość

Wyjścia binarne

Wyjścia binarne - parametry

Przyłącze elektryczne

Screw connection – 16…28 AWG (1,31…0,081 mm²)

Diody serwisowe

3x LED


Pamięć - rejestrowane dane

Pamięć - typ

Pamięć - pojemność

Pamięć - częstotliwość zapisu


Configuration software, Modbus

Stopień ochrony


Temperatura pracy

-30…+60 °C

Wilgotność pracy


Typ obudowy

DIN rail

Materiał obudowy


Wymiary obudowy

See: drawing

W komplecie


Stay up to date

Call or write

Contact by phone or email

Ta strona korzysta z ciasteczek aby świadczyć usługi na najwyższym poziomie. Dalsze korzystanie ze strony oznacza, że zgadzasz się na ich użycie.