Si-QSWOCP1

    • Powerful Microprocessor
    • Functionally Programmable
    • Fast Configurations
    • Modbus Interface
    • Wide range of supply voltage
    • Additional options available
Do pobrania:

    SiOne can be humidity, temperature, barometric pressure, differentia pressure, carbon dioxide (CO2), volatile organic compounds (VOC), particulate matter (PM) and/or Analog signal transmitters (it depends on model). The SiOne line combined with an internal and/or external sensors provide state-of-the-art functionality. Various models are available including wall, duct or remote sensors. SiOne is introducing powerful programming capabilities. Settings of the device can be modified through USB programming unit, PC software or Modbus interface. Modbus RTU baud rate, Modbus RTU address and type of Analog outputs can be fast changed by configuration jumpers.

    Schemat połączenia SiOne

     

    ( 1 ) – RS-485 interface (Modbus RTU) or Industrial Ethernet (Modbus TCP)
    ( 2 ) – programmable relay output On/Off (option)
    ( 3 ) – programmable (up to 3) Analog outputs: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA (option)

     

    SiOne transmitters offers Fieldbus (RS-485 – Modbus RTU) or Industrial Ethernet (Modbus TCP) interfaces. The SiOne line can provide up to three fully programmable and scalable Analog outputs (types of output: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA). Analog output can be modified by configurations jumpers, Modbus interface or USB programming unit. SiOne transmitter with relay output can be used as simple binary sensor (pressostat, hygrostat, thermostat, CO2-stat, …). Threshold and hysteresis of output can be also modified by Modbus or programming unit.

    Technical drawing

    All dimension in mm. This drawing is for informational purposes only. The manufacturer reserves the right to make changes in the product dimensions without prior notice.

Kod produktu

Si-QSWOCP1

Typ urządzenia

Transmitter

Mierzone parametry

Carbon dioxide (CO₂), Humidity, Temperature

Zakres pomiarowy

-20…+60 °C, 0…100 %RH, 0…2000 ppm

Dokładność (maks.)

±0.2 °C, ±2.0 %RH, ±50 PPM ±5% (% RD)

Dodatkowe opcje

Typ sensora

Integrated

Filtr sensora

Plastic filter, gap dimensions -1.5 x 1.2 mm

Częstotliwość pomiaru

0.25 Hz (CO2), 1 Hz, 1 Hz (humidity)

Zasilanie

11.5…32 VDC / 24 VAC ± 5% (…-HV version), 11.5…27 VDC

Interfejs

RS-485 (Modbus RTU)

Wyjścia analogowe

Wyjścia analogowe - typ

Wyjścia analogowe - rozdzielczość

Wyjścia binarne

1x

Wyjścia binarne - parametry

Programmable, Relay output – max. 0.5 A / 30 VDC

Przyłącze elektryczne

Screw connection – 16…28 AWG (1,31…0,081 mm²)

Diody serwisowe

2x LED

Wyświetlacz

Pamięć - rejestrowane dane

Pamięć - typ

Pamięć - pojemność

Pamięć - częstotliwość zapisu

Parametryzacja

Configuration software, DIP-switches, Modbus

Stopień ochrony

IP65

Temperatura pracy

-10…+60 °C

Wilgotność pracy

0…95 %RH (WITHOUT CONDENSATION)

Typ obudowy

Cable

Materiał obudowy

Polycarbonate

Wymiary obudowy

See: drawing

W komplecie

Manual

Stay up to date
Consultation

Call or write

Contact by phone or email